Equipment Introduction

BRL3 three-stage pipeline dispersion emulsifier, hygienic design, on-line CIP, parts surface for fine polishing. The working chamber is equipped with three sets of fixed, rotor (fine teeth, medium teeth, coarse teeth), the material from the axial input, after three sets of rotor high shear dispersion, emulsification, homogeneous radial output, the material handling more fine.
Applicable to medicine, cosmetics, food and other hygiene requirements of higher production, in line with GMP norms.

Equipment advantages

•    Large capacity, suitable for continuous on-line production in industry

•    Narrow particle size distribution and high uniformity
•    Save time, energy and efficiency
•    Low noise and smooth operation
•    Eliminate quality differences between batch-to-batch productions
•    No dead ends, 100% of the material is sheared by dispersion
•    With short distance, low lift delivery function, can be recycled
•    Simple operation and easy maintenance
•    Automate control

•    可实现自动化控制

Equipment Icon

Model	A	H	L	H2	H3	L2	B	D
BRL3-60	310	385	822	202	108	163	1.5˝	1.25˝
BRL3-100	340	420	910	227	125	175	2˝	1.5˝
BRL3-120	410	515	1130	265	140	195	2.5˝	2˝
BRL3-140	410	515	1130	265	150	195	2.5˝	2˝
BRL3-165	410	555	1213	285	160	208	3˝	2.5˝
BRL3-200	480	630	1405	320	180.5	223	3.5˝	3˝
BRL3-220	585	745	1535	370	191	223	4˝	3.5˝
BRL3-240	650	82	1580	400	201	223	4˝	3.5˝
BRL3-260	650	820	1655	400	211	228	5˝	4˝
BRL3-300	730	990	1945	435	231	228	5˝	4˝

Note
* The upper limit of processing capacity in the table refers to the data measured when the medium is "water";* The upper limit of processing capacity in the table refers to the data measured when the medium is "water";
* If the medium viscosity or solid content is high, it is recommended with pipeline high shear dispersing emulsifier with the use;
* If high temperature, high pressure, flammable and explosive, corrosion and other special conditions, the need to provide detailed and accurate parameters;
* The data in this table are subject to change without notice, the correct parameters to provide the prevail in kind.
* If high temperature, high pressure, flammable and explosive, corrosion and other special conditions, the need to provide detailed and accurate parameters