Equipment Introduction

Unique stator and rotor structure, resulting in superior shear, quickly reduce the droplet size, so that more stable emulsion, more uniform dispersion. Provide small test - pilot - large-scale production of a full range of products to meet different installation conditions and non-standard requirements.

Principle of equipment

High shear dispersive emulsification is the efficient, rapid, uniform distribution of one or more phases into the other continuous phase, and in general each phase is mutually incompatible. Due to the high tangential speed and high kinetic energy caused by the high-speed mechanical rotation, the material is subjected to strong mechanical and hydraulic shear, centrifugal extrusion, liquid layer friction and impact in the narrow gap between the stator and the rotor. Tearing and turbulence, so that the immiscible solid phase, liquid phase, gas phase in the appropriate mature technology and the right amount of additives under the action of instantaneous uniform fine dispersion emulsification, after high-frequency cycle, and finally get stable Of high-quality products.

Mobile emulsifier, is mainly based on the actual needs of customers factory production, in the top of the machine equipped with mobile lift movements, hydraulic lifting movements, simple manual lift

   

Model	Power(kW)	Speed (rpm)	A	B	C	D	E	F	n-d	Applicable volume(L)
BRH-90	1.5	2900	80	140	355	165	200	615	4-φ16	10-50
BRH-100	2.2	2900	88	145	650	165	200	975	4-φ16	50-100
BRH-120	4	2900	120	180	750	215	250	1130	4-φ16	100-300
BRH-140	7.5	2900	140	210	900	265	300	1350	4-φ16	200-800
BRH-160	11	2900	160	230	1050	300	350	1600	4-φ16	300-1000
BRH-180	18.5	2900	180	260	1200	300	350	1780	4-φ20	500-1500
BRH-200	22	1480	220	270	1200	300	350	1850	4-φ20	800-2000
BRH-220	30	1480	240	320	1355	350	400	2005	8-φ20	1000-3000
BRH-240	37	1480	260	340	1395	350	400	2140	8-φ20	1500-5000
BRH-270	55	1480	290	380	1650	500	550	2520	8-φ20	2000-8000
BRH-290	75	1480	310	400	1660	500	550	2580	8-φ20	3000-10000

Note
* The upper limit of processing capacity in the table refers to the data measured when the medium is "water";
* If the medium viscosity or solid content is high, it is recommended with pipeline high shear dispersing emulsifier with the use;
* If high temperature, high pressure, flammable and explosive, corrosion and other special conditions, the need to provide detailed and accurate parameters;
* The data in this table are subject to change without notice, the correct parameters to provide the prevail in kind.